AO5041 detection terminal current input isolated safety barrier (one in one out, one in two out)
- Product description
- Technical specifications
- Product portfolio
-
- AO5041 detection terminal current input isolated safety barrier (one in one out, one in two out)
◆ Performance Overview
Provide isolated working power supply to transmitters in hazardous areas, while detecting the current in the circuit, and output current or voltage signals to the safe area through isolated transmission. The three terminal isolation of input, output, and power supply has the advantages of fast response, low power consumption, and good temperature characteristics.
-
◆ Technical parameters
Explosion proof mark: [Exia] Ⅱ C
Dangerous area allows input signal: current signal
Input impedance: approximately 80 Ω
Can output signals to the safe zone:
Current: 0 (4) mA~20mA; 0mA～10mA
Voltage: 0 (1) V to 5V; 0V～10V
Output load capacity:
0(4)mA～20mA：≤300Ω；
0mA～10mA：≤600Ω
0(1)V～5V：≥1MΩ；
0V～10V：≥2MΩ
Output ripple:<1mV Temperature drift:<30ppm/℃
Distribution output voltage: open circuit voltage ≤ 24V, full load 20mA output voltage ≥ 15.5V
Isolation transmission accuracy: ± 0.2% F ∙ S (25 ℃± 2 ℃)
Response time: ≤ 0.2ms Stability time: ≤ 2ms
Frequency response: 0Hz~300Hz (0Hz~5kHz can be customized)
Dielectric strength: ≥ 2500V AC (between input/output/power supply, leakage current 1mA, testing time 1min)
Insulation resistance: ≥ 100M Ω (between input/output/power supply)
Electromagnetic compatibility: EMC complies with IEC61000-4
Certification parameters of National Quality Supervision and Inspection Center for Instrumentation and Electrical Products (CQST): Um=250V AC/DC
10. Between terminals 11: Uo=5V
ⅡC ⅡB ⅡA
Co 70μF 700μF 700μF
9. Between terminals 11: Uo=26V, Io=87.6mA, Po=570mW
ⅡC ⅡB ⅡA
Co 0.069μF 0.539μF 1.82μF
Lo 3.2mH 9.6mH 25.6mH
Power supply: DC 18-32V (typical value 24V DC)
Power consumption: Single current source input, single output 0.4W
Single current source input, dual output 0.6W
Single channel two/three wire input, single channel output 1.0W
Single channel two/three wire input, two channel output of 1.2W
-
AO5041 detection terminal current input isolated safety barrier (one in one out, one in two out) Instrument Model AO5041 Isolated Safety Bar for Detector End Current Input (1-In-1-Out, 1-In-2-Out) Dual Output Channels (Two Channels) A A 4~20mA Signal Output B B 0~20mA Signal Output C C 0~20mA Signal Output AH AH 4~20mA Signal Output (with HART Communication) Z Z Custom Current Range Signal Output 1 1 1~5V Signal Output 2 2 0~5V Signal Output 3 3 0~10V Signal Output 9 9 Custom Voltage Range Signal Output Dimensions / Standard DIN Rail Mount (23.5×96.5×116.5 mm) T Ultra-Thin DIN Rail Mount (13×107×115 mm) Selection Example AO5041AAT
Message
Related Products
HOW CAN WE HELP ?
Get In Touch With Us!
Contact Us
Address：
No.36, Longhui Road, Wujin National Hi-Tech Industrial Development Zone, Jiangsu Province, China
Address：
Building 5 and 11, Fuzhou IoT Industrial Park,
No. 12 Xingye West Road, Mawei District, Fuzhou City
Tel：
+86-13055728858
Email:
aotai03@fjautec.com Mr. Zhou
aotai01@fjautec.com Mr. Liao
aotai02@fjautec.com Mr. Zhang
aotai04@fjautec.com Mr. Chen
Email:
autec@163.com
Copyright © 2025 Fujian Aotai Automation Equipment Co., Ltd., All Rights Reserved.