Ao3051 Lt High Precision Intelligent Diaphragm Type Anti-Corrosion Pressure Transmitter, Liquid Level Meter, Flange Installation
- Product description
- Technical specifications
- Product portfolio
-
- Ao3051 Lt High Precision Intelligent Diaphragm Type Anti-Corrosion Pressure Transmitter, Liquid Level Meter, Flange Installation
Basic Info.
Target audience Liquid Measurement range 0~6kPa to 0~10000kPa Output 4-20mA DC, intelligent HART fieldbus protocol signal output. Power supply 24VDC, can operate at 18VDC (with LCD display, the minimum is 18VDC), and the maximum is 36VDC. Positive and negative migration Regardless of the output, after positive and negative migration, the upper and lower limits of the range must not exceed the limits of the range. 0-100% reference range. Temperature range Filling silicone oil measurement component operating temperature (medium temperature): -40°C to+130°C Humidity range Relative humidity ranging from 1% to 100% Sensor volume variation Less than 0.16 cm³ Instruction table Digital display type Explosion-proof type Flameproof type ExdIICT6; Intrinsic safety type ExiaIICT6 Range and zero point Can be changed by clicking on the table headers Damping Between 0 and 32 seconds, it can be continuously adjusted. Start time 2 seconds, no need for preheating Product Description
The AO3051LT level transmitter is a field transmitter that can be directly installed on pipes or containers. Since the isolation diaphragm comes into direct contact with the liquid phase medium, there is no need to lead the positive pressure side out with a capillary tube. Therefore, it can measure the level, pressure, and density of media such as high temperature, high viscosity, prone to crystallization, prone to precipitation, and strong corrosive substances, and then convert them into a 4-20mA signal output. The AO3051LT level transmitter is installed and connected using standard flanges, with the option of flat flanges and insertion flanges for users. The flange diaphragm materials include 316L, Hastelloy, tantalum, etc. The body of the AO3051LT level transmitter uses a compact small diaphragm capacitive sensor produced using advancedforeign technologies and equipment. The key raw materials and components are all imported, with an advanced design principle, a complete range of types and specifications, and easy installation and use. The appearance of this model integrates the features of the widely used 3051 and EJA in China, giving it unparalleled forward and backward compatibility, preventing waste due to product obsolescence or being too advanced, and protecting your investment. To adapt to the level of automation in China, this product series comes in two types: the regular analog output model and the intelligent model with the HART fieldbus protocol.
-
Message
Related Products
HOW CAN WE HELP ?
Get In Touch With Us!
Contact Us
Address：
No.36, Longhui Road, Wujin National Hi-Tech Industrial Development Zone, Jiangsu Province, China
Address：
Building 5 and 11, Fuzhou IoT Industrial Park,
No. 12 Xingye West Road, Mawei District, Fuzhou City
Tel：
+86-13055728858
Email:
aotai03@fjautec.com Mr. Zhou
aotai01@fjautec.com Mr. Liao
aotai02@fjautec.com Mr. Zhang
aotai04@fjautec.com Mr. Chen
Email:
autec@163.com
Copyright © 2025 Fujian Aotai Automation Equipment Co., Ltd., All Rights Reserved.